Parts season....$€£$€£

[biglentil]

AIM command solenoid $287.

Never had one go bad, the wires break from vibration inside the insulation. Zip ties are your friend.

[farmaholic]

I've been having x20 problems this year as well. Seems like it gets to hot, then screen stops working then will power off. Been hanging in there as long as I've got a/c funnelled in that direction. Just figured that out tonight.

Ours doesn't shut down, "yet". Just the touch screen so far...had a mind if it's own and couldn't be calibrated. ... if we were lucky enough to get it calibrated, it wouldn't hold and then no matter where you moved the cursor it always would go back to one spot. Are those X20/Topcon monitors supposed to have cooling fans in them? It does feel a bit toasty. Our mickey mouse Envisio Pro Raven guidance monitor has one humming away in it.

[Partners]

Alternator for a jd 4450.
Jd price..543...
Price at first stop in humboldt 153..
Sure love the Pattison group..
Only thing cheaper there is zero turn lawnmowers.

[farmaholic]

9 inch by about 5 ft of flexible down spout for the Bourg auger on seed cart... $270.00! Erick's (old Goodall in Regina) only had 8 &10 inch. We bought a piece of 8 inch a while ago for the replacement but couldn't get it on the auger. So we cut into the pockets where the coiled wire is in and snipped the wire down the sides of the spout only two or three times and could then stretch the rubber enough to get it over the auger discharge.

"SMALL" "PAPER" element filter for DEF systems.... $130.

And $12.00 canola is too much?

[fjlip]

9 inch by about 5 ft of flexible down spout for the Bourg auger on seed cart... $270.00! Erick's (old Goodall in Regina) only had 8 &10 inch. We bought a piece of 8 inch a while ago for the replacement but couldn't get it on the auger. So we cut into the pockets where the coiled wire is in and snipped the wire down the sides of the spout only two or three times and could then stretch the rubber enough to get it over the auger discharge.

"SMALL" "PAPER" element filter for DEF systems.... $130.

And $12.00 canola is too much?

Our prices are 40 years old in actual numbers... should be $$70 canola and $35 wheat to equal buying power when I started in 70's.
Who the F*CK gets paid the same $$$ per hour after 45 years of employment????

[Sodbuster]

9 inch by about 5 ft of flexible down spout for the Bourg auger on seed cart... $270.00! Erick's (old Goodall in Regina) only had 8 &10 inch. We bought a piece of 8 inch a while ago for the replacement but couldn't get it on the auger. So we cut into the pockets where the coiled wire is in and snipped the wire down the sides of the spout only two or three times and could then stretch the rubber enough to get it over the auger discharge.

"SMALL" "PAPER" element filter for DEF systems.... $130.

And $12.00 canola is too much?

The 10" work much better, slips over auger spout and attach 2 tarp straps over top of auger hooked into the coil wire. We like this better than the original and much more durable.

[Quadtrack]

9 inch by about 5 ft of flexible down spout for the Bourg auger on seed cart... $270.00! Erick's (old Goodall in Regina) only had 8 &10 inch. We bought a piece of 8 inch a while ago for the replacement but couldn't get it on the auger. So we cut into the pockets where the coiled wire is in and snipped the wire down the sides of the spout only two or three times and could then stretch the rubber enough to get it over the auger discharge.

"SMALL" "PAPER" element filter for DEF systems.... $130.

And $12.00 canola is too much?

Had to laugh when I read this. Exact same experience except Moody's charged $331 for the 9 in bourgault spout. Took it back and got 10 in from eriks, enough for two spouts plus a new stronger clamp for $150. Bolted a couple layers of 1/4 in plastic on the auger, clamped that 10" spout on and it works better that that limp spout bourgault bends you over for.
Someone must supply the 9" to them but no way $300 plus only to have it hook on the sharp tank lids and rip again.
I like bourgault equipment but this episode was bs.

[farmaholic]

It's a ****in auger spout that probably isn't even worth $20...listen stealerships and machinery manufacturers. ....the peasants are tired of being ripped off!

Karma will exact it's revenge.

Here's a concept.....try getting ****in lean if times are tough! Like we have always had to do. Greedy pricks!

Oh ya, and don't take it out on the frontline parts counter people....they are only the messenger, most of the time.

[sk_wheatking]

The Russians must be rigging parts prices!!!!

[farmaholic]

I'll call Vladimir in the morning....