• You will need to login or register before you can post a message. If you already have an Agriville account login by clicking the login icon on the top right corner of the page. If you are a new user you will need to Register.

Announcement

Collapse
No announcement yet.

Friggin Computers

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Friggin Computers

    Neighbours 9230 coming home from field - shifting to road gear- combine stops dead and refuses to budge - puts brake on and no matter what- will not move.

    #2
    Originally posted by sumdumguy View Post
    Neighbours 9230 coming home from field - shifting to road gear- combine stops dead and refuses to budge - puts brake on and no matter what- will not move.
    gear shifter get stuck or computer died? if its the gear shifter stuck you have go pound the front axel where that shift selenoid is, also try shaking the combine or push it to get the shifter to get unstuck. happened to me years ago.

    Comment


      #3
      It was really dark by that time, combine is left on a deserted dirt road. codes say that transmission wires are disconnected. Maybe control module but will try your fix first MBGrower. Can’t be anything too serious, can it be?

      Comment


        #4
        Originally posted by sumdumguy View Post
        It was really dark by that time, combine is left on a deserted dirt road. codes say that transmission wires are disconnected. Maybe control module but will try your fix first MBGrower. Can’t be anything too serious, can it be?
        Check the simple things first. Solenoid, relay or fuse.

        Comment


          #5
          Combine is back in business. It was stuck between gears. Hope this is not a sign of things to come. Thanx for the suggestions Agrivillers. Safe harvest.🍀

          Comment


            #6
            It’s important to shift only one gear at a time - stop - then shift to the next gear!
            Don’t be shifting from 2 to 4 in 1 second, it should take 30 seconds ish

            Might have to shut engine off, disconnect power at the battery switch then reboot every thing in order - including letting the pro 700 fully boot up to run screens before starting the engine.

            Comment


              #7
              Originally posted by sumdumguy View Post
              Combine is back in business. It was stuck between gears. Hope this is not a sign of things to come. Thanx for the suggestions Agrivillers. Safe harvest.🍀
              if it happens again, you can sometimes fix right from inside the cab by shaking the combine by turning on the threshing unit, and turn the rear wheels back and forth. sometimes this is just enough to get the gears to release.

              Comment


                #8
                Originally posted by MBgrower View Post
                if it happens again, you can sometimes fix right from inside the cab by shaking the combine by turning on the threshing unit, and turn the rear wheels back and forth. sometimes this is just enough to get the gears to release.
                Good idea, if that still does not work supposedly a ground thin 15/16 wrench will slide under the shift motor located on top of the tranny and it can be coerced into gear. Be careful out there and may you never blow a tranny :-).
                Last edited by biglentil; Aug 24, 2019, 08:25.

                Comment


                  #9
                  Originally posted by biglentil View Post
                  Good idea, if that still does not work supposedly a ground thin 15/16 wrench will slide under the shift motor located on top of the tranny and it can be coerced into gear. Be careful out there and may you never blow a tranny :-).
                  My perverted mind caught that pun. LOL

                  Comment

                  • Reply to this Thread
                  • Return to Topic List
                  Working...